Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Removal & Installation) >> Computerized Engine Controls >> Programming

Computerized Engine Controls: Programming

WARNING: This page is about a different car, the 2000 Volvo V40 and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

A new ECM is delivered WITHOUT software. Vehicle must be connected to Volvo VADIS system to download ECM software.

scientia non olet · About Mike's Workshop Manuals