Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2000 >> 9-3 Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Protection >> Adjustment - Replacement >> Glass breakage sensor >> To fit

To fit

Fig 1: Installing Glass Breakage Sensor
G03463884Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Replace the connector. Ensure that the connector is properly seated and attached to avoid vibrations.
  2. Fir the switch panel. Start with the front edge and push it forwards. Then press the rear edge upwards.
  3. Fit the lens cover.
scientia non olet · About Mike's Workshop Manuals