Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 1993 >> 900 Commemorative >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> A/C Clutch >> A/C Clutch Relay (900 Non-Turbo)

A/C Clutch Relay (900 Non-Turbo)

  1. Remove relay from relay panel. Relay panel is located under hood, on left side.
  2. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87B (Red wire). Replace relay if continuity exists.
  3. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87 (Green wire). Replace relay if continuity exists.
  4. Connect 12 volts to relay terminal No. 86 (Blue wire). Connect terminal No. 85 (Black wire) to ground. Relay should click.
  5. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87B (Red wire). Replace relay if continuity does not exist.
  6. Check for continuity between relay terminals No. 30 (Yellow wire) and No. 87 (Green wire). Replace relay if continuity does not exist.
scientia non olet · About Mike's Workshop Manuals