Installing Front Pressure Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Incorrect handling of safety bolts

Danger of injury
Loss of torque

→ Always use new fastening screws and nuts following removal.

→ Observe specified tightening torques.

→ Carry out a visual inspection of all re-used parts.

Position front pressure sensor on the door sub-frame.
Clip in front pressure sensor.
Tighten fastening nut -2- for the pressure sensor to the prescribed tightening torque. Tightening Torque 2.5 Nm (2 ft. lb.)

Fig 1: Tightening Nut On Pressure Sensor
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Turn door sub-frame 180°.
Plug electric plug connection into the front pressure sensor -1- (-A- ) and lock it -a- .

Fig 2: Plugging In Electric Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.