Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Porsche >> 2016 >> Macan S >> Repair and Diagnosis >> Engine Performance >> Ignition System >> 28 - Ignition System >> WM 287219 Removing and installing knock sensor >> Removing knock sensor

Removing knock sensor

  1. Observe and note installation position of knock sensors.

    Disconnect cable plug -1-  .

    G12834033Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Loosen and unscrew fastening screw -2-  and remove knock sensor -1 -  from the crankcase.
    G12834034Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1  Knock sensor
2  Screw, M8 x 35
scientia non olet · About Mike's Workshop Manuals