Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Porsche >> 2016 >> Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (69 Occupant Protection/Personal Protection -- 987-BOXSTER-CAYMAN) >> WM 696819 Removing And Installing AWS Control Unit (All Models) >> Installing AWS Control Unit

Installing AWS Control Unit

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position AWS control unit on the holder and screw it down using the three fastening screws -2-  .
    Fig 1: Positioning AWS Control Unit On Holder
    G09591574Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position AWS holder on the seat bracket and screw it down using the three fastening screws -1-  .
    Fig 2: Position AWS Holder On Seat Bracket
    G09591575Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Push electric connector onto AWS control unit until it is felt to engage.
  4. Insert seat central connector into AWS holder and clamp by turning to the right.
scientia non olet · About Mike's Workshop Manuals