Input signals

The following queries can be run using this menu item:

NOTE: Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort.

MENU ITEMS AND FUNCTION REFERENCE CHART

Menu item	Function
Tuner parameters	Using this menu item, you can check the tuner parameters. Connect and start the Porsche System Tester II No. 9588 and switch on the ignition. Select 'Cayenne' in the Vehicle type menu and confirm with the [>>] key. Select 'PCM2' in the Control units menu and confirm with the [>>] key. Select 'PCM2 GW' in the PCM2 function selection and confirm with the [>>] key. Select 'Input signals' in the PCM2 GW function selection and confirm with the [>>] key. Select "Tuner parameters" in the Cayenne PCM2 GW input signals function selection and confirm with the [>>] key.

Menu item

Function

Using this menu item, you can check the tuner parameters.

Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
Select 'Cayenne' in the Vehicle type menu and confirm with the [>>] key.
Select 'PCM2' in the Control units menu and confirm with the [>>] key.
Select 'PCM2 GW' in the PCM2 function selection and confirm with the [>>] key.
Select 'Input signals' in the PCM2 GW function selection and confirm with the [>>] key.
Select "Tuner parameters" in the Cayenne PCM2 GW input signals function selection and confirm with the [>>] key.