Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Porsche >> 2004 >> Boxster Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Windshield Wipers And Washer >> Removing And Installing Spray Nozzle For Headlight Washing System >> Installation

Removing And Installing Spray Nozzle For Headlight Washing System: Installation

  1. Push hose as far as it will go onto the new spray nozzle and fasten the hose clamp.
  2. Reinstall new spray nozzle with holder in the same position. Tightening torque of the M6 hexagon nut 5 Nm (3.5 ft.lb)
  3. Push plug-in coupling to lock with an audible click, then check the locking with a slight pull.
  4. Install main head headlight and check position of the spray nozzle in the cover trim. Remove the main head again and Centre the spray nozzle if necessary.
  5. Install main headlight, check it and perform a function test.
scientia non olet · About Mike's Workshop Manuals