Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe GT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 2.4L (Lax) - Repair Instructions >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect cable from negative battery terminal. refer TO Battery Negative Cable Disconnection and Connection
  2. Remove the right engine under cover.
  3. Remove the generator assembly. Refer to Generator Replacement (2.4L)
    4. Fig 1: Identifying Crankshaft Position Sensor, Connector Clamp & Wire Harness
    GM2016540Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the crankshaft position sensor connector (1).
  5. Separate the crankshaft position sensor connector clamp and wire harness (3).
  6. Remove the bolt and crankshaft position sensor (4).
scientia non olet · About Mike's Workshop Manuals