Circuit/System Verification
With Service Bay Test
- Verify the EVAP system using the EVAP Service Bay Test, refer to Service Bay Test . DTC P043E or P043F should not set.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
Without Service Bay Test
- Verify the EVAP system components and hoses are correctly routed and securely connected.
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.