Removal Procedure

Remove the right front wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
Remove the right engine undercover. Refer to Engine Splash Shield Replacement - Right Side .
Remove the generator. Refer to Generator Replacement (2.4L) or Generator Replacement (1.8L) .
Remove the coolant surge tank. Refer to Radiator Surge Tank Replacement .
Remove the washer reservoir. Refer to Windshield Washer Solvent Container Replacement .

Fig 1: Identifying Electronic Brake Control Module (EBCM) Harness Connector Lock Lever & EBCM Harness Connector

GM2022950

Courtesy of GENERAL MOTORS CORP.

Release the electronic brake control module (EBCM) harness connector lock lever (1).
Disconnect the EBCM harness connector (2).

Fig 2: Identifying Brake Pipes

GM2022956

Courtesy of GENERAL MOTORS CORP.

Mark the brake pipes (1-6) to aid in installation.

Fig 3: Identifying Brake Line Clamp Bolt & Clamp

GM2022954

Courtesy of GENERAL MOTORS CORP.

Remove the brake line clamp bolt (1) and clamp (2).

Fig 4: View Of Brake Pipes At Brake Modulator Assembly

GM2022955

Courtesy of GENERAL MOTORS CORP.

Remove the brake pipes (1-6) from the brake modulator assembly.
Plug the brake pipes in order to prevent loss or contamination of brake fluid.

Fig 5: Identifying Brake Pressure Modulator Bracket & Bolts

GM2022957

Courtesy of GENERAL MOTORS CORP.

Remove the 2 bolts (2) from the brake pressure modulator bracket (3).
Remove the nut (1) and the brake pressure modulator assembly and bracket.

Fig 6: Identifying Brake Pressure Modulator Assembly Bolts & Bracket

GM2022958

Courtesy of GENERAL MOTORS CORP.

Remove the 3 bolts and the brake pressure modulator assembly from the bracket.