Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C1241 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the EBCM.
  2. Test for less than 1 ohm between the terminals 1, 13 and ground.
    • If greater than the specified range, test the ground circuit for an open/high resistance.
  3. Ignition ON, check for 11-14V between terminals, 12, 24, 34 and ground.
    • If the voltage is not as specified, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the BPMV.
scientia non olet · About Mike's Workshop Manuals