Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows System >> Repair Instructions >> Door Window Guide Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Window Guide Channel, Bolts & Screws
    GM846805Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2 screws (3). Tighten the window guide channel bolts to 8 N.m (71 lb in).
  2. Install the rubber window run channel into the center guide channel.
  3. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
scientia non olet · About Mike's Workshop Manuals