Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Child Seat Anchor Bracket & Bolt
    GM2023609Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear access panel.
  2. Remove the following components from the vehicle:
    • The bolt (1)
    • The child seat anchor bracket (2)
scientia non olet · About Mike's Workshop Manuals