Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
    2. Fig 1: Locating Ignition Coil Connectors
    GM2016641Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the 4 ignition coil connectors (1, 2, 3, 4).
    3. Fig 2: Identifying Bolts & Ignition Coils
    GM2016643Courtesy of GENERAL MOTORS CORP.
  3. Remove the 4 bolts and 4 ignition coils (1, 2, 3, 4).
scientia non olet · About Mike's Workshop Manuals