Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions >> Repair Instructions >> Heated Oxygen Sensor Replacement - Sensor 1 >> Removal Procedure

Removal Procedure

  1. Remove the windshield wiper motor and link assembly. Refer to Windshield Wiper Motor Replacement .
  2. Remove the outer cowl top panel.
  3. Remove the engine cover. Refer to Engine Cover Replacement .
    4. Fig 1: Locating Air Fuel Ratio Sensor Connector & Clamp
    GM2016674Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the air fuel ratio sensor connector (1) and clamp (2).
    5. Fig 2: Identifying Air Fuel Ratio Sensor
    GM2016676Courtesy of GENERAL MOTORS CORP.
  5. Using the EN-46577:  remover/installer (1), remove the air fuel ratio sensor.
scientia non olet · About Mike's Workshop Manuals