Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Automatic >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> Stability System Caution Indicator Always On >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the EBCM connector.
  2. Test for infinite resistance between the CSW circuit and ground.
    • If less than the specified range, test the circuit for a short to ground. If circuit tests normal, replace the VSC switch.
  3. Using a scan tool, command the IPC display test ON and OFF. The VSC warning indicator should turn ON and OFF.
    • If IPC does not perform as specified, replace the IPC.
scientia non olet · About Mike's Workshop Manuals