Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> G6 GXP, 4D Sedan >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 3.6L - Repair Instructions >> Repair Instructions >> Air Cleaner Outlet Duct Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Air Cleaner Outlet Duct Components
    GM1843662Courtesy of GENERAL MOTORS CORP.
  1. Position and install the air cleaner outlet duct to the MAF/IAT sensor and the throttle body.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the air cleaner outlet duct bolt (2) and tighten to 10 N.m (89 lb in).
  3. Tighten the air cleaner outlet duct clamps (1, 3) at the MAF/IAT sensor and throttle body to 4 N.m (35 lb in).
    4. Fig 2: PCV Fresh Air Tube
    GM1843627Courtesy of GENERAL MOTORS CORP.
  4. Position the PCV tube.
  5. Connect the PCV fresh air tube (1) quick connect fitting to the air cleaner outlet duct.
  6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About Mike's Workshop Manuals