Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2010 >> G5 Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Engine Controls And Fuel - 2.2L - Repair Instructions >> Repair Instructions >> Mass Airflow Sensor with Intake Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of MAF/IAT Sensor
    GM1656943Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF/IAT sensor.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the MAF/IAT sensor screws and tighten to 0.6 N.m (5 lb in).
    3. Fig 2: View Of Engine Harness Electrical Connector To MAF/IAT Sensor
    GM1647998Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine harness electrical connector to the MAF/IAT sensor.
scientia non olet · About Mike's Workshop Manuals