Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> Vibe GT, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L (Lax) - Introduction >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove engine cover.
  2. Remove air cleaner cap sub-assembly with hose.
    3. Fig 1: Exploded View Of Camshaft Position Sensor & Bolt
    GM2016536Courtesy of GENERAL MOTORS CORP.
  3. Remove camshaft position sensor.
  4. Disconnect the camshaft position sensor connector.
  5. Remove the bolt and the camshaft position sensor.
scientia non olet · About Mike's Workshop Manuals