Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> Vibe Base, 1.8 8, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 1.8L (Lay) - DTC P0010 To DTC P0420 >> DTC P0010 or P0013 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the CMP actuator solenoid.
  2. Test for 6.9-7.9 ohms at 20°C (68°F) between terminals 1 and 2.
    • If not within the specified range, replace the CMP actuator solenoid.
  3. Test for infinite resistance between each terminal and the solenoid housing.
    • If not the specified value, replace the CMP actuator solenoid valve.
scientia non olet · About Mike's Workshop Manuals