Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install the MAP sensor and bracket.
- Install the MAP sensor bolt and tighten to 10 N.m (89 lb in).
- Connect the MAP sensor electrical connector (2).
- Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
CAUTION:
Refer to Fastener Caution
.