Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> Torrent Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Torrent and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Tray Support Bracket
    GM1822646Courtesy of GENERAL MOTORS CORP.
  1. Position the battery tray support bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the battery tray support bracket bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

    3. Fig 2: View Of Battery Tray Support Bracket Bolt
    GM1822642Courtesy of GENERAL MOTORS CORP.
  3. Install the battery tray support bracket bolt at the multiuse relay and fuse bracket.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  4. Install the battery box. Refer to Battery Box Replacement .
scientia non olet · About Mike's Workshop Manuals