Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> Torrent Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of High Mounted Stop Lamp & Electrical Connector
    GM1344337Courtesy of GENERAL MOTORS CORP.
  1. Position the high mounted stop lamp to the spoiler.
  2. Connect the washer hose.
  3. Connect the electrical connector.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the spoiler to the high mounted stop lamp screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  5. Install the spoiler to the liftgate. Refer to Spoiler Replacement - Rear in Body Rear End.
scientia non olet · About Mike's Workshop Manuals