Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 2

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 2

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the engine cover. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .
1	EGR Temperature Sensor Assembly CAUTION: Refer to Fastener Caution . Procedure Disconnect the harness connector. Detach the EGR temperature sensor assembly harness connector from the bracket. Tighten: 44 N.m (32 lb ft)

Callout

Component Name

Preliminary Procedures

Remove the engine cover.
Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .

EGR Temperature Sensor Assembly

CAUTION: Refer to Fastener Caution .

Procedure

Disconnect the harness connector.
Detach the EGR temperature sensor assembly harness connector from the bracket.

Tighten: 44 N.m (32 lb ft)