Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the seat from the vehicle. Refer to Driver or Passenger Seat Replacement .
- Disconnect the electrical connector from the seat position sensor.
- Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
- Remove the seat position sensor from the seat adjuster track bracket.
WARNING:
Eye protection must be worn when drilling rivets to reduce the chance of personal injury.