Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G8 GXP, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System & Fuel System - 3.6L - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: View Of Fuel Tank Pressure Sensor Electrical Connector
    GM802790Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the fuel tank pressure sensor.
  3. Open the retaining strap.
  4. Carefully pry the locking tabs away from the pressure sensor.
  5. Pull upward in order to remove the pressure sensor from the fuel tank.
scientia non olet · About Mike's Workshop Manuals