Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Object Detection System - Park Assist System) >> Repair Instructions >> Information Center Telltale Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Information Center Telltale Assembly Bezel
    GM491154Courtesy of GENERAL MOTORS COMPANY
  1. Insert your fingers between the headliner and the information center telltale assembly bezel. Gently pull down to release the display bezel.
    2. Fig 2: View Of Screwdriver & Locking Tab Of Telltale Assembly
    GM491156Courtesy of GENERAL MOTORS COMPANY
  2. Use a screwdriver to release the locking tab at the rear of the telltale assembly.
    3. Fig 3: View Of Information Center Telltale Assembly
    GM491157Courtesy of GENERAL MOTORS COMPANY
  3. Tilt the display down. Pull down to remove.
  4. Disconnect the electrical connector.
scientia non olet · About Mike's Workshop Manuals