Radio Speaker Amplifier Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Speaker Amplifier & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement . Refer to Control Module References for replacement and setup information.
1	Low Frequency Audio Amplifier Bolts (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Low Frequency Audio Amplifier Assembly TIP: Disconnect the electrical connectors.

Callout

Component Name

Preliminary Procedure

Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement .
Refer to Control Module References for replacement and setup information.

Low Frequency Audio Amplifier Bolts (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Low Frequency Audio Amplifier Assembly
TIP: Disconnect the electrical connectors.