Rear Side Door Window Inner Sealing Strip Replacement

WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Door Window Belt Inner Sealing Strip

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) or Rear Side Door Trim Panel Replacement (Traverse) .
1	Rear Side Door Inner Window Sealing Strip Procedures Start from the front edge of the door, pull upward on the inner window sealing strip to release it from the pinch-weld flange. Install the inner window sealing strip to the front edge of the door, press firmly onto the pinch-weld flange and work it rearward.

Callout

Component Name

Preliminary Procedure:
Remove rear door trim panel. Refer to Rear Side Door Trim Panel Replacement (Enclave) or Rear Side Door Trim Panel Replacement (Acadia/OUTLOOK) or Rear Side Door Trim Panel Replacement (Traverse) .

Rear Side Door Inner Window Sealing Strip

Procedures

Start from the front edge of the door, pull upward on the inner window sealing strip to release it from the pinch-weld flange.
Install the inner window sealing strip to the front edge of the door, press firmly onto the pinch-weld flange and work it rearward.