Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Power Door Lock System And Release Systems) >> Repair Instructions >> Rear Compartment Lid Release Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Rear Compartment Lid Release Switch & Wiring Connector
    GM1937296Courtesy of GENERAL MOTORS CORP.
  1. Install the rear compartment lid release switch (2) to the instrument panel compartment.
  2. Connect the rear compartment lid wiring connector (1) to rear compartment lid release switch (2).
  3. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement (LHD) .
  4. If re-programming is required. Refer to Control Module References .
scientia non olet · About Mike's Workshop Manuals