Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Alternator Bracket To Engine Block Mounting Bolts

Courtesy of GENERAL MOTORS CORP.

Install the alternator bracket (3) to the engine block.

NOTE: Refer to Fastener Notice .

Install the alternator bracket to engine block mounting bolts (1).
Tighten: Tighten the bolts in the sequence shown.

Tighten: Tighten the bolts 1 to 27 N.m (20 lb ft).

Tighten: Tighten the bolt 2 to 50 N.m (37 lb ft).
Install the alternator. Refer to Generator Replacement (3.6L Engine) or Generator Replacement (6.0L Engine) .