Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement (3.6L Engine) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the alternator. Refer to Generator Replacement (3.6L Engine)  or Generator Replacement (6.0L Engine) .
    2. Fig 1: Identifying Alternator Mounting Bracket To Cylinder Block Retaining Bolts
    GM1958079Courtesy of GENERAL MOTORS CORP.
  2. Remove the coolant inlet pipe to alternator mounting bracket retaining nut (3).
  3. Remove the alternator mounting bracket to cylinder block retaining bolts (4).
  4. Remove the alternator mounting bracket (2) from the cylinder block (1).
scientia non olet · About Mike's Workshop Manuals