Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust System Insulator, Hanger, Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Rear Insulator Hanger To Rear Muffler
    GM1965575Courtesy of GENERAL MOTORS CORP.
  1. Install the rear insulator hanger (1) to the rear muffler (2).
    2. Fig 2: Identifying Rear Insulator Hanger To Body Retaining Bolts
    GM1949717Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the rear insulator hanger to body retaining bolts (1) and tighten to 26 N.m (19 lb ft).
scientia non olet · About Mike's Workshop Manuals