Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G8 Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0900 >> Circuit/System Verification

Circuit/System Verification

  1. Engine running measure and record the voltage at the battery terminals. Verify that the battery voltage is 12.6-15.5 V
  2. Engine running, observe the scan tool EBCM Battery Voltage Signal parameter. The reading should be between 12.6 and 15.5 V
    • If not within the specified range, replace the EBCM.
scientia non olet · About Mike's Workshop Manuals