Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G6 GXP, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.6L - Introduction >> Repair Instructions >> Ignition Coil Replacement - Bank 2 >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coil View
    GM860797Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coils.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the ignition coil bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: Identifying Ignition Coils & Fuel Injector Wiring Harness Connector
    GM1839726Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connectors (2) to the ignition coils.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About Mike's Workshop Manuals