Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle >> Disassembly Procedure

Disassembly Procedure

    Fig 1: View Of Power Steering Pump Flow Control Valve
    GM1776816Courtesy of GENERAL MOTORS CORP.
  1. Remove the power steering pump flow control valve fitting (5) from the power steering pump housing (1).
  2. Remove the power steering pump flow control valve fitting O-ring seal (4) from the power steering pump flow control valve fitting (5).
  3. Remove the power steering pump flow control valve (3).
  4. Remove the power steering pump flow control valve spring (2).
scientia non olet · About Mike's Workshop Manuals