Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System & Fuel System - 3.5L - Introduction) >> Repair Instructions >> Spark Plug Wire Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Spark Plug Wires At Ignition Coils
    GM1299209Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wires (1-6) to the engine.
  2. Install the spark plug wires to the ignition coils.
    3. Fig 2: Identifying Spark Plug Wires At Engine Right Side
    GM1299397Courtesy of GENERAL MOTORS CORP.
  3. Install the spark plug wires (1, 3, and 5) to the engine right side spark plugs.
  4. Install the spark plug wires to the retaining clip.
    5. Fig 3: Identifying Spark Plug Wires At Engine Left Side
    GM1299208Courtesy of GENERAL MOTORS CORP.
  5. Install the spark plug wires (2, 4, and 6) to the engine left side spark plugs.
  6. Install the spark plug wires to the retaining clips.
  7. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About Mike's Workshop Manuals