Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P0575 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the Cruise On/Off switch parameter. The reading should be Off and change to On when the switch is pressed.
  2. Observe the Cruise Set/Coast Switch parameter. The reading should be Inactive and change to Active when the switch is pressed.
  3. Observe the Cruise Resume/Accel. Switch parameter. The reading should be Inactive and change to Active when the switch is pressed.
scientia non olet · About Mike's Workshop Manuals