Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Cruise Control System) >> Diagnostic Information and Procedures >> DTC P0575 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the cruise control switch connector.
  2. Ignition ON, Verify the cruise control switch parameters are Off or Inactive.
    • If not the specified values test the switch signal circuit for a short to voltage. If the circuit tests normal replace the IPC.
  3. If all circuits test normal replace the cruise control switch.
scientia non olet · About Mike's Workshop Manuals