Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G3 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L (LXV) >> Diagnostic Information and Procedures >> DTC P0650 >> Circuit/System Verification

Circuit/System Verification

  1. Engine idling, command the appropriate MIL ON and OFF with a scan tool while observing the following control circuit status parameters:
    • MIL Ckt Short Gnd Test Status
    • MIL Ckt Open Test Status
    • MIL Ckt Short Volts Test Status

      Each parameter should display OK or Not Run.

  2. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About Mike's Workshop Manuals