Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Lighting System) >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stop Lamp Switch & Electrical Connector
    GM1537922Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Battery Disconnect Warning .
  1. Disconnect the negative battery cable.
  2. Disconnect the stoplamp switch electrical connector.
  3. Twist the switch, and remove the switch from the brake pedal bracket.
scientia non olet · About Mike's Workshop Manuals