Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2009 >> G3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement (1.2L) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Generator, Retaining Bolts, Harness Connector & Nut
    GM2044938Courtesy of GENERAL MOTORS CORP.
  1. Install the generator (3).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the generator retaining bolt (1) and nut. Tighten to 4.75 N.m (3.5 lb ft).
  3. Install the battery harness connector nut (2) to connect the battery positive connector.
  4. Connect the harness connector.
  5. Install the accessory belt. Refer to DRIVE BELT REPLACEMENT .
  6. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Connect the battery negative cable Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals