Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (HVAC System - Manual) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the blower case assembly. Refer to Blower Case Assembly Replacement .
    2. Fig 1: Identifying Air Inlet Actuator Screws
    GM2015264Courtesy of GENERAL MOTORS CORP.
  2. Remove the connector.
  3. Remove the two screws (2) and the air inlet actuator (1) from the blower case.
scientia non olet · About Mike's Workshop Manuals