Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> Vibe Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 1.8L (LV6) - DTC P0010 To DTC P0340 >> DTC P0011 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector of the CMP actuator solenoid.
  2. Test for 6.9-7.9 ohms at 20°C (68°F) between the actuator solenoid terminals.
    • If not within the specified range, replace the CMP actuator solenoid.
  3. Test for infinite resistance between each terminal of the CMP actuator solenoid and the CMP actuator solenoid housing.
    • If not the specified value, replace the CMP actuator solenoid valve.
scientia non olet · About Mike's Workshop Manuals