Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> Vibe Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Cellular System, Entertainment System & Navigation System) >> Repair Instructions >> OnStar Vehicle Interface Unit Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Communication Interface Module Nuts
    GM2014968Courtesy of GENERAL MOTORS CORP.
  1. Remove the communication interface module. Refer to Communication Interface Module Replacement .
  2. Remove the two nuts (1).
  3. Disconnect the vehicle interface unit module electrical connector.
  4. Remove the vehicle interface unit module with bracket (2), from vehicle.
scientia non olet · About Mike's Workshop Manuals