Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> Torrent Base, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0899 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition On. Measure and record the voltage at the battery terminals. Verify that the battery voltage is 11-17 volts. Repeat with the engine running.
  2. Engine running. Observe the scan tool Battery Voltage Signal parameter in the EBCM data list. Verify that the scan tool displays a value that is within 1 volt of the battery voltage recorded in step 1.
  3. Go to Diagnostic Aids .
scientia non olet · About Mike's Workshop Manuals