Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Vehicle Yaw Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH front seat. Refer to Front Seat Replacement - Bucket .
    2. Fig 1: Deceleration Sensor Bracket And Bolt
    GM839796Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt (1) and the yaw rate sensor bracket (2).
  3. Disconnect the yaw rate sensor electrical connector.
    4. Fig 2: Deceleration Sensor And Bolts
    GM839809Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 bolts (1) that retain the yaw rate sensor (2).
  5. Remove the yaw rate sensor (2) from the vehicle.
scientia non olet · About Mike's Workshop Manuals