Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G8 Base >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Front Wheel Speed Sensor Wiring Harness Replacement >> Removal Procedure - Right

Removal Procedure - Right

    Fig 1: View Of Wheel Speed Sensor Jumper Harness Electrical Connector
    GM1943672Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution .
    CAUTION: Refer to Vehicle Lifting Caution .
    CAUTION: Refer to Brake Dust Caution .
  1. Disconnect the wheel speed sensor jumper harness electrical connector (1).
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Remove the right hand front wheel. Refer to Tire and Wheel Removal and Installation .
    4. Fig 2: View Of Wheel Speed Sensor Jumper Harness & Electrical Connector
    GM1943671Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the wheel speed sensor jumper harness electrical connector (4).
  5. Detach the wheel speed sensor jumper harness (2) from the brake hose/wheel speed sensor jumper harness bracket (1).
  6. Detach the wheel speed sensor jumper harness (2) from the front strut mounting bracket (3).
    7. IMPORTANT: Note the routing of the wheel speed sensor jumper harness (2).
  7. Remove the wheel speed sensor jumper harness (2) from the vehicle.
scientia non olet · About Mike's Workshop Manuals