Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2008 >> G6 Base, 3.5 N >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 3.5L - DTC P0335 To DTC P2544 >> DTC P0335 >> Component Test

Component Test

  1. Inspect the CKP sensor for looseness and correct installation. Remove the CKP sensor from the engine and inspect the sensor and the O-ring for damage.
    • If the sensor is loose, incorrectly installed, or damaged, repair or replace the CKP sensor.
  2. Connect the CKP sensor connector to the CKP sensor; turn ON the ignition, with the engine OFF.
  3. Observe the CKP Active Counter parameter on the scan tool; pass a steel object by the tip of the sensor repeatedly. The CKP Active Counter parameter should increment.
    • If the parameter does not increment, replace the CKP sensor.
scientia non olet · About Mike's Workshop Manuals